- Broadcom BCM2837 chipset running at 1.2 GHz
- 64-bit quad-core ARM Cortex-A53
- 802.11 b/g/n Wireless LAN
- Bluetooth 4.1 (Classic & Low Energy)
- Dual core Videocore IV® Multimedia co-processor
- 1 GB LPDDR2 memory
- Supports all the latest ARM GNU/Linux distributions and Windows 10 IoT
- microUSB connector for 2.5 A power supply
- 1 x 10/100 Ethernet port
- 1 x HDMI video/audio connector
- 1 x RCA video/audio connector
- 4 x USB 2.0 ports
- 40 GPIO pins
- Chip antenna
- DSI display connector
- microSD card slot
- Dimensions: 85 x 56 x 17 mm
There are two giant upgrades in the Pi 3. The first is a next generation Quad Core Broadcom BCM2837 64-bit ARMv8 processor, making the processor speed increase from 900 MHz on the Pi 2 to up to 1.2GHz on the Pi 3.
The second giant upgrade (and this is the one we’re personally most excited about) is the addition of a BCM43143 WiFi chip BUILT-IN to your Raspberry Pi. No more pesky WiFi adapters – this Pi is WiFi ready. There’s also Bluetooth Low Energy (BLE) on board making the Pi an excellent IoT solution (BLE support is still in the works, software-wise)
Lastly, there’s an upgraded switched power source that goes up to 2.5 Amps instead of just 2 Amps – allowing your Pi to power even more powerful devices over USB ports.
Note: Our 5V 2A power supply still works great with the Pi 3. For most uses, you don’t need 2.5 amps of power and our 5V2A supply should be sufficient.
And our HighPi case perfectly compatible with Pi 3 as well!
The best part about all this is that the Pi 3 keeps the same shape, connectors, and mounting holes as the Pi 2. The only difference is a slight change in where the LEDs are. 99% of cases and accessories will still be fully compatible with the Pi 3, Pi 2, and Pi B + – though if you have a case with a metal top there might be some WiFi chip difficulties.
Be the first to review “Buy Raspberry Pi 3 – Model B – ARMv8 with 1G RAM Online”